User Menus - Siemens SPCK 420 User Manual

User programming via the keypad
6

User Menus

6.2
18
Siemens AB
Security Products
 A 6 digit reset code displays on the top line.
2. Provide 6 digit code to installer.
3. Receive newly generated code from installer.
4. Enter new code at the AUTH CODE prompt.
5. Press SELECT.
 The message SYSTEM RESTORED displays on the top line of the display.
User Menus
1. Enter a valid User PIN.
2. Scroll to MENUS and press SELECT.
3. To select a programming option, use the up/down arrow keys or enter the digit
listed in the table below.
1 SYSTEM STATUS
2 INHIBIT
3 ISOLATE
4 SET DATE/TIME
5 TEST
6 EVENT LOG
7 ACCESS LOG
8 CHIME
9 USERS
10 CHANGE PIN
11 SMS CONTROL
12 SMS EVENTS
13 DOOR CONTROL
14 GRANT ACCESS
15 REPORT TO ENG
Allows user to view the status of the following:
OPEN ZONES
ALERTS
ISOLATIONS
BATTERY
AUX
Allows users to inhibit a zone.
Allows users to isolate a zone.
Allows users to set the time and date.
Allows users to perform a BELL TEST, WALK TEST, WPA
TEST or change AUDIBLE OPTIONS.
Allows users to view a log of the most recent events on the
system.
Allows users to view a log of the most recent access on the
system.
Allows user to enable or disable chime function on all zones
where the chime has been programmed as an audible alert
feature.
Allows Manager type users to add, edit, and delete users.
Allows users to change their user PIN..
Allows users to configure SMS PIN.
Allows users to set up the SMS service for sending short
text messages to mobile phones via the PSTN Line.
Allows the user to control doors. He can lock / unlock and
reset the door to normal operation.
Allows users to grant Engineer or Manufacturer access to
the system.
Allows the user to request that the last 10 events in the log
be sent to the engineer by SMS message. The 10 events
may require more than one SMS message, depending on
A6V10209178
26.09.2011