Activating Control Relays - Siemens HiPath 3000 Operating Manual

Step by Step
> <
Service?
> <
*90=Control Relay
On?
> <
Service?
> <
#90=Control Relay
Off?

Activating control relays

The service engineer can set up a maximum of 4 control
relays that enable various equipment (for example, door
opener) to be activated and deactivated.
It is possible to access a specific control relay. Depend-
ing on the configuration, the control relays can be
• activated and deactivated automatically, or
• activated and deactivated automatically on the basis
of a timer.
Prerequisite: The service engineer has set up at least
one switch.
This function can also be called by entering the code
( page 103).
Activating a control relay
c or d Press and hold down the Talk key or press the Speaker-
phone key.
Call the system menu.
Menu
[
Select the menu item and confirm.
[
Select the menu item and confirm.
o
Follow the user guidance system from this point
onwards. Enter the required switch code (1... 4).
a Press the On-hook key to end the process.
Deactivating a control relay
c or d Press and hold down the Talk key or press the Speaker-
phone key.
Call the system menu.
Menu
[
Select the menu item and confirm.
[
Select the menu item and confirm.
o
Follow the user guidance system from this point
onwards. Enter the required switch code (1... 4).
a Press the On-hook key to end the process.
Conducting calls – enhanced functions
59