DGS-3204 Ethernet Switch Management User's Guide
DGS-3204 Management
Adding your DGS-3204 Switch to the Map
Before you can manage individual DGS-3204 Ethernet switches, you need to
add them to your D-View network map. You can do this either by:
♦ Using D-View's Auto Discover capability to add all new SNMP-
manageable devices to the map.
♦ Using the Add-Modify Map Device command to place each switch on the
map.
To use the second method:
1.
Press the Add/Modify a device on the map button shown below.
2.
Select the DGS-3204 from the icon list at the right of the Add-Modify
Map Device dialog.
8
DGS-3204 Management