Advanced Settings - SMC Networks EZ Connect SMC2662W User Manual

Advanced Settings

Click the "General" tab (see the previous screen). In the "Connect
using" field, make sure that the adapter shown is the SMC2662W
EZ Connect Wireless USB Adapter.
1. Click Configure. Click the "Advanced" tab.
2. Set the "Fragmentation Threshold." (The default 2,346 means
"Disabled") See "Terminology" on page 49 for a description of
"Fragmentation Threshold."
3. "Preamble Type" offers a dropdown list with three options:
Auto, Long, or Short. If you aren't sure whether all the Clients
and Access points in your wireless network support the Short
RF preamble, then leave this setting on "Auto." (Default) See
"Terminology" on page 49 for a description of "Preamble
Type."
U W
SING THE INDOWS
XP C
ONFIGURATION
T
OOL
39