C
ONFIGURATION AND
Monitor
When you start the wireless USB utility, the information window
for the SMC2662W is shown as in the figure below. Click on the
"Monitor" tab to view the network status of the wireless adapter.
Click Modify to configure the "Operating Mode," "Channel," "SSID"
and "Tx Rate." After making a configuration change, the Apply
button will become enabled. Click Apply to save the changes.
Operating Mode – Set the station operation mode to "802.11 Ad
Hoc" for network configurations that do not have an access point,
or to "Infrastructure" for configurations with an access point.
("Infrastructure" is the default setting)
30
D
IAGNOSTICS