Chevrolet 2013 Malibu Owner's Manual page 201

3. Say Pair. The system responds
with instructions and a four-digit
Personal Identification Number
(PIN). The PIN is used in Step 5.
4. Start the pairing process on the
cell phone that you want to pair.
For help with this process, see
your cell phone manufacturer's
user guide.
5. Locate the device named Your
Vehicle in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN provided in Step 3. After the
PIN is successfully entered, the
system prompts you to provide a
name for the paired cell phone.
This name will be used to
indicate which phones are
paired and connected to the
vehicle. The system responds
with <Phone name> has been
successfully paired after the
pairing process is complete.
6. Repeat Steps 1 5 to pair
additional phones.
Listing All Paired and Connected
Phones
The system can list all cell phones
paired to it. If a paired cell phone is
also connected to the vehicle, the
system responds with is connected
after that phone name.
1. Press / . The system
responds Ready, followed by
a tone.
2. Say Bluetooth.
3. Say List.
Deleting a Paired Phone
If the phone name you want to
delete is unknown, see Listing All
Paired and Connected Phones.
1. Press / . The system
responds Ready, followed by
a tone.
2. Say Bluetooth.
3. Say Delete. The system asks
for which phone to delete.
4. Say the name of the phone you
want to delete.
Infotainment System
Connecting to a Different Phone
To connect to a different cell phone,
the Bluetooth system looks for the
next available cell phone in the
order in which all the available cell
phones were paired. Depending on
which cell phone you want to
connect to, you may have to use
this command several times.
1. Press / . The system
responds Ready, followed by
a tone.
2. Say Bluetooth.
3. Say Change phone.
If another cell phone is
found, the response will be
<Phone name> is now
connected.
If another cell phone is not
found, the original phone
remains connected.
7-41