Settings - Navman iCN 510 User Manual

iCN 510 | User Manual

15. Settings

You can modify the following settings to suit your preferences.
Screen Brightness
1. Press and hold the + or - button to display the brightness indicator bar.
2. Press and hold the + or - button to adjust the brightness.
You can also adjust screen brightness from the Screen screen.
Volume
1. Rotate the Volume Control button up or down to hear a sound test.
2. Rotate the Volume Control button up or down and hold to display the volume bar.
• Rotate the Volume Control button up or down to adjust the volume.
You can also adjust volume from the Volume screen.
Route Settings
1. From the Main Menu, tap Settings.
2. From the Settings screen, tap Routes
3. Move the Route Type slider towards Shortest to give more weighting
to the shortest travelling distance when calculating a route; Move the
Route Type slider towards Quickest to give more weighting to the
fastest travelling time when calculating a route.
4. Move the Preference for Freeways slider towards Use Less to use
freeways less often when calculating a route; Move the Preference
for Freeways slider towards Use More to use freeways more often
when calculating a route.
5. Move the Preference for Urban Roads slider towards Use Less
to use urban roads often when calculating a route; Move the
Preference for Urban Roads slider towards Use More to use urban
roads more often when calculating a route.
6. Press Page.
7. Select the Avoid Toll Roads, Avoid Unsurfaced Roads and Avoid Ferries check boxes to avoid these areas
when your route is calculated.
8. Select the Warn when using Toll Roads, Warn when using Unsurfaced Roads and Warn when using
Ferries check boxes to display a warning message at the start of your trip if your route will include these areas.
9. To enable Back on Track™ automatic rerouting, select the Automatic Rerouting check box . Automatic
rerouting will update the calculated route if you take a wrong turn.
10. Tap Page.
11. To enable the Route Demonstrator, allowing you to plan and view a route without a GPS fi x, select the
Demonstrate Route check box.
12. To enable the route demonstrator to be repeatedly played, select the Repeat check box.
13. To enable the Smart demonstration to be played, select the
The demonstration will navigate between the fi rst and second Favourite after a ten second delay.
Rout . The Routing screen will display. Routes
 demonstration to be played, select the

Smart Demonstration  Demonstration

26
check box.