Cisco ENH900EXT User Manual page 39

Wireless Configuration Wi-Fi Protected Setup Example
Wireless Configuration Wi-Fi Protected Setup Page Description
Use the descriptions and instructions in the following table to configure the basic
settings for Wi-Fi Protected Setup for the residential gateway. After you make your
selections, click Save Settings to apply your changes or Cancel Changes to cancel.
Section
Basic Settings
4042592 Rev B
Field Description
Enable or Disable the wireless network
Wi-Fi Protected Setup Configuration
The Wi-Fi Protected Setup feature automatically configures an
encryption-secured, wireless network. To use Wi-Fi Protected Setup, you
must have at least one other device that supports Wi-Fi Protected Setup
in your network. After you have configured your Wi-Fi Protected Setup
devices, you can manually configure other devices.
WPS Push Button Setup (Option 1)
Press the Wi-Fi Protected Setup button on the Basic Wireless Settings
page or the button on the back panel of the gateway to register a wireless
client with the gateway. Press the Wi-Fi Protected Setup software button
on the client side at the same time as the Wi-Fi Protected Setup button is
pushed on the gateway. The connection will be automatically set up.
Configure Wireless Settings
39