Rinse Aid; Consumption (Ecofeedback) - Miele G 6370 Operating Instructions Manual

Settings menu

Rinse aid

You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from
approx. 0-6 ml.
The factory default setting is 3 ml.
If the function to adjust the Sensor
wash programme has been activated,
the amount of rinse aid dispensed in
the Sensor wash programme can be
higher than that set.
If spots appear on crockery and glass‐
ware:
– Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
– Decrease the rinse aid dosage.
 Select the rinse aid dosage you want
and confirm with OK.
86

Consumption (EcoFeedback)

You can programme the dishwasher so
that the energy and water consumption
of the currently selected programme
appears in the display. The estimated
consumption can be displayed before
the programme starts and the actual
consumption can be displayed after the
programme has finished.
In this menu you can also call up the to‐
tal energy and water used in all previ‐
ous dishwasher programmes (see "Car‐
ing for the environment, EcoFeedback
consumption indicator").
Consumption indicator
 Select the (Consumption)
tion and confirm with OK.
 Select the setting you want and con‐
firm with OK.
Total consumption
 Select the
Total consumption
and confirm with OK.
 You can call up the values for
and with the  arrow but‐
Water
tons.
You can also reset the values for the to‐
tal consumption to 0.
 Select the
Reset
with OK.
 Select the
Yes
with OK.
 Confirm the message with OK.
The values are now reset to 0.
Display
option
Energy
option and confirm
option and confirm
op‐