Energy Management; At The End Of A Programme - Miele G 6370 Operating Instructions Manual

Operation

Energy management

To save energy, the dishwasher will
switch off automatically 10 minutes af‐
ter the last time a button has been
pressed or 10 minutes after the end of
the programme (see "Settings menu,
Optimise standby").
 Press the  button to switch the
dishwasher back on.
The dishwasher will not switch off
whilst a programme or the FlexiTimer
is running or if there is a fault.
46

At the end of a programme

At the end of a programme, the In-op‐
eration indicator light will be visible
flashing slowly with the door shut. The
buzzer might also be sounding.
The programme has finished when 
appears in the display and the
Finished
door has opened slightly (if applicable).
If the
Consumption
tion is switched on, you can now call up
the actual energy and water consump‐
tion of the programme which has just
finished (see "Caring for the environ‐
ment, EcoFeedback consumption indi‐
cator").
The drying fan may continue to run for
a few minutes at the end of the pro‐
gramme.
 Open the door completely to re-en‐
gage the door closing mechanism.
You can now empty the dishwasher.
The In-operation indicator light will go
out 10 minutes after the end of the pro‐
gramme if the door is closed.

If you have deactivated the auto‐
matic door opening function (see
"Settings menu, AutoOpen"), but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully.
Otherwise steam from the dishwash‐
er could damage the edge of the
worktop because the fan is no longer
running.
programmable func‐