Advertisement
Advertisement
Related Manuals for Harbinger HP112
Summary of Contents for Harbinger HP112
- Page 1 OWNER’S MANUAL HP1 12 > Powered Loudspeaker " 500W 129d Bi-Amped Peak SPL HP1 15 > Powered Loudspeaker " 500W 131d Bi-Amped Peak SPL HP215 Powered > Loudspeaker " 850W 134dB Bi-Amped Peak SPL HP1 18S > Powered Subwoofer " 700W 129d Powered...
-
Page 2: Table Of Contents
HP118S subwoofer to form larger systems. All birch plywood. Owner’s Manual for models HP112 • HP115 • HP215 • HP118S... -
Page 3: Important Safety Instructions
Important Safety Instructions Please keep this instruction manual for future reference and for the 10. POWER SOURCES – This product should be operated only from the duration of owning the HP powered loudspeaker. Please carefully type of power source indicated on the rating label. If you are not read and understand the instructions inside this owner’s manual before sure of the type of power supply to your home, consult your product attempting to operate your new powered loudspeaker. - Page 4 INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE UNIT. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. Owner’s Manual for models HP112 • HP115 • HP215 • HP118S...
-
Page 5: System Features
PETP-FILM DIAPHRAGM COMPRESSION DRIVER • 16-gauge, wrap-around steel grilles • Optimized acoustic and magnetic design achieves outstanding • Metal handles, and rubber feet rubber strips (HP112) clarity and reliability • Metal pole mounting cup (HP118S) • A one-piece, PETP film diaphragm and surround optimizes energy transfer for greater efficiency •... -
Page 6: Hp Model Descriptions
HP Model Descriptions HP112: The HP112 was designed to operate on the floor as a HP215: The HP215 was designed to operate sitting on the stage monitor, to be pole mounted on a 1 1/2" diameter speaker floor, stage, or on top of the HP118S subwoofer enclosure. Do... - Page 7 HP Rear Controls & Operation HP118S HP112, HP115 & HP215 2-WAY 500-WATT POWERED LOUDSPEAKER BI-AMP DESIGN INTEGRATED SIGNAL PROCESSING www.harbingerproaudio.com...
- Page 8 This will on the most of the time, the operator should reduce the signal enable your subwoofer-equipped system to operate properly and level so that LIMIT LED only flashes occasionally. Owner’s Manual for models HP112 • HP115 • HP215 • HP118S...
- Page 9 HP118S’s circuitry. channel’s audio input. HP112: We recommend switching the filter ON for the best sound Balanced connections should be used as much as possible to clarity. If using as a floor monitor, turn the filter ON for improved...
- Page 10 ON the HP118S subwoofer, then turn ON all HP Full-range loudspeakers. • Power OFF Sequence: Turn OFF all HP Full-range loud speakers and then HP118S subwoofers, then power down all source devices. Owner’s Manual for models HP112 • HP115 • HP215 • HP118S...
-
Page 11: Set-Up Diagrams
Set-up Diagrams Stereo HP Main Speakers (HP112, HP115, HP215) MAIN OUTPUT Checklist • Make certain loudspeakers are Powered OFF and Levels • Power ON Mixer, then Power ON speakers. turned down. • Bring the Mixer’s volume up to normal operating level. - Page 12 Stereo Main HP Speakers (HP112, HP115, HP215) with Single HP118S Subwoofer MAIN OUTPUT Checklist • Make certain loudspeakers are Powered OFF and Levels • Connect the HP118S HP Output R to the Input of the Right turned down. Main Speaker.
- Page 13 Stereo HP Main Speakers (HP112, HP115, HP215) with Two HP118S Subwoofers AUX SEND Checklist • Make certain loudspeakers are Powered OFF and Levels • Connect the Right HP118S HP Output R to the Input of the Right turned down. Main Speaker.
- Page 14 • Set the Low Cut switch to ON if you want less bass response • Turn down the Mixer’s volume and Aux Send Master. and greater vocal clarity. Owner’s Manual for models HP112 • HP115 • HP215 • HP118S...
- Page 15 Linking Multiple HP Main Speakers (HP112, HP115, HP215) MAIN OUTPUT Checklist • Also known as Daisy-Chaining, linking multiple speakers will • Power ON Mixer, then Power ON speakers. send the exact same input signal from one speaker to the next.
- Page 16 • Connect the Mixer’s Right Output to the R Input of the Right • Do not adjust the Level so high that the Red LIMIT LED is subwoofer 1. constantly lit. Owner’s Manual for models HP112 • HP115 • HP215 • HP118S...
-
Page 17: Specifications
Specifications HARBINGER HP SPECS HP112 HP115 HP215 HP118S Dual 15” 2-Way 12” 2-Way multipurpose 15” 2-Way full-range Configuration full-range powered 18” powered subwoofer powered loudspeaker powered loudspeaker loudspeaker Transducers SP-1804 - 18” cast SP-1200 - 12” speaker SP-1500 - 15” speaker SP-1500 - 15”... - Page 18 62 lbs. / 28.2 kg 89 lbs. / 40.5 kg 97 lbs. / 44.1 kg * Based on unclipped sine-wave rms voltage ** Level control in fully clockwise position Owner’s Manual for models HP112 • HP115 • HP215 • HP118S...
-
Page 19: Cables And Connectors
Cables and Connectors XLR/F to XLR/M microphone cable Balanced XLR mixer 1 (shield) output to HP speaker TRS (balanced) ¼" phone jack to XLR/M Balanced ¼" mixer 1 (shield) Ring output to HP speaker Sleeve TS (unbalanced) ¼" phone jack to XLR/M Unbalanced ¼"... -
Page 20: Warranty
California Prop 65 Warning: This product may contain a chemical(s) known to the state of not been authorized or approved by Harbinger. This two (2) years warranty does not cover California to cause cancer or birth defects or other reproductive harm.