Technical Specifications; In Case Of Difficulty - AT&T 992 User Manual

0992_CIB_1ATT_FINAL_022105 2/22/04

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS
REN
Power Adapter
FCC #
Weight
Dimensions
54
4:46 PM Page 54
0.1B
AC 120V 60Hz 5W AC9V 300mA
6YFTE01B992-01
2.165 lbs.
Length: 8.68 inches
Width: 8.58 inches
Height: 5.1 inches

IN CASE OF DIFFICULTY

If you have difficulty operating this phone, try the suggestions below. For
www.telephones.att.com
Customer Service, visit our website at
1 800 222–3111
or call . Have the serial number, found on the
underside of your phone, available when contacting Customer
Service. Please retain your receipt as your proof of purchase.
To purchase accessories or replacement parts contact Customer
www.telephones.att.com
Service. Visit our website at
1 800 222–3111.
call
TELEPHONE OPERATION
PROBLEM SOLUTION
No Dial Tone • Make sure all plugs are connected properly.
Inspect the line cord connections at the
modular jack(s) and at the telephone. Also
inspect the coiled handset cord connection
at both ends.
• Check to make sure the phone is not on
hold.
• In the event of a power failure when there
is not a charged 9V battery installed,
Line 2 cannot be used. Use Line 1 to
make your call.
• Unplug the telephone and connect it to
another modular jack. If it still does not
work and other telephones in your home
are working, the problem is with this phone.
PROBLEM SOLUTION
An Error Tone Sounds If you try to exit area code programming
During Area Code without entering a Home Area Code, you
Programming will hear an error tone. Follow the
instructions to "Program Home and Local
Area Codes" beginning on page 21.
PROBLEM SOLUTION
Call Cannot Be Dialed In the event of a power failure, a charged 9V
or is Dialed Slowly battery must be installed for the phone to dial
out or receive calls normally. If no battery is
installed the phone will not ring, but can be
used to make a call on Line 1.
or
55