Programmable Features
Any reference in this manual to controls that are
"preprogrammed" means that a qualified radio technician must
use the radio's programming software to assign a feature to a
control.
Your dealer can program the programmable buttons as
shortcuts to radio functions or preset channels/groups
depending on the duration of a button press:
•
Press
–
Pressing and releasing rapidly.
•
Long press
–
Pressing and holding for the preprogrammed
duration (between 0.25 seconds and 3.75 seconds).
•
Hold down
–
Keeping the button pressed.
Assignable Radio Functions
Bluetooth On/Off
–
Allows you to turn on/off the Bluetooth.
Bluetooth Audio Reroute
–
Allows you to toggle the audio
route between radio speaker or Remote Speaker Microphone
and Bluetooth headset.
Bluetooth Headset PTT
–
Keys up the Bluetooth Headset's
microphone.
Bluetooth Clear All Pairing
–
Allows you to clear all pairing
information for Bluetooth. This is accessed by a long press of
the Bluetooth On/Off Button.
Call Response
–
Allows you to answer a private call.
Dynamic Priority (Conventional Only)
in a scan list (except for the Priority-One channel) to temporarily
replace the Priority-Two channel.
Emergency
–
Depending on the programming, initiates or
cancels an emergency alarm or call.
Internet Protocol
–
Displays the Internet Protocol (IP) address,
device name and status of the radio.
Man Down Clear
–
Clears the alarm of Man Down mode which
was triggered when your radio achieves or passes a tilt angle
threshold or a combination of the angle threshold and a motion
sensitivity level.
Monitor (Conventional Only)
–
for all radio traffic until function is disabled.
Nuisance Delete
–
Temporarily removes an unwanted channel,
except for priority channels or the designated transmit channel,
from the scan list.
One Touch 1 – 4
–
Launches a specific feature with one single
button-press. You can setup as many as four separately
programmed buttons for four different features.
Private Line Defeat (Conventional Only)
coded squelch (DPL or PL) that is preprogrammed to a channel.
Rekey Request
–
Notifies the dispatcher you require a new
encryption key.
–
Allows any channel
Monitors a selected channel
–
Overrides any
English
11