Table of Contents
Advertisement
To customize plus code dialing
You can customize how phone numbers that begin with a plus "+" sign will be dialed.
1.
Tap Start > Settings > Personal tab > Phone > Services tab.
2.
Select Plus Code Dialing, then tap Get Settings. The following screen then appears:
3.
To place local and international calls from the United States, select Enable.
When you place calls, the "+" sign at the beginning of phone numbers that you dial will be replaced as
follows:
•
When you enter a long distance phone number that starts with "+1", the "+" will be removed and the
rest of the number will be dialed. For example, if you entered +1 416 13 456, the number to be
dialed will be 141613456.
•
When you enter an international phone number that starts with a "+" followed by a digit other
than 1, the "+" will be replaced with the United States international dialing code, which is already
set by default. For example, if you entered +58 1 13 456, the number to be dialed will be
01158113456.
4.
To place calls to the United States from another country, select Disable and change the International
dialing code to the one used by the country where you are in.
So when you dial a phone number that starts with "+" followed by any digit (0 - 9), the "+" will be
replaced with the international dialing code of the country where you are in.
Tip
If you modified the international dialing code, you can tap Reset to change it back to the default.
13.4 Using Task Manager
Task Manager lets you view and stop running programs, configure the
Menu on the Home screen.
To open Task Manager
•
Tap the Quick Menu button on the top right corner of the Home screen to open the Quick Menu, then
tap
.
•
On the Home screen, slide to the Settings tab and then tap All Settings. On the System tab, tap Task
Manager.
To switch back to a running program
•
Tap the program name in the Quick Menu.
•
On the Task Manager screen, tap and hold the program name on the Running tab, then tap Activate.
To configure the Exit (
You can configure the Exit button to shut down running programs when the button is tapped, or to just
temporarily close the program screen but keep the program running.
1.
On the Task Manager screen, tap the Button tab.
2.
Select the Enable the "X" button to end running programs check box.
Note
3.
Choose the action for shutting down programs (by tapping the
the
button).
4.
Tap OK.
) button
When the Enable the "X" button to end running programs check box is not selected, tapping the
Exit button will only close a program screen. The program is not ended and continues to run in the
background.
Managing Your Device 139
button, and enable the Quick
button, or by tapping and holding
Advertisement
Table of Contents
