Lorex Vantage LW2232 Instruction Manual page 10

Features
• Real time wireless video with MPEG-4 compression at 640x480 (VGA) resolution
• Single 2 channel receiver minimizes cable clutter and offers greater value.
• Extended bandwidth delivers smooth high frame rate video.
• SignalGuard™ Technology continuously monitors the wireless signal and automatically reconnects
upon detecting low signal strength.
• Next generation adaptive Frequency Hopping Spread Spectrum (FHSS) technology greatly reduces
signal interference.
• Simple installation. No video cable required
• Easily connects to any surveillance DVR (BNC).
• Connect multiple receivers to your surveillance recorder (DVR) to create a wireless surveillance
3
solution .
• Up to 165ft (50m) indoor / 500ft (152m) outdoor wireless range
• SMA connectors for compatibility with range extension accessories.
• Weatherproof cameras can be installed both indoors and outdoors (IP66 rated)
• Weatherproof power connectors for added protection from the elements
• Night vision range up to 135ft (41m) / 90ft (27m)
• Built-in auto-mechanical infrared camera filter achieves accurate color reproduction in varying lighting
conditions.
• Vandal resistant camera design with cable pass-through mounting brackets.
• 2 channel receiver adds 2 separate wireless video channels to your DVR.
• High gain antenna ensures improved long distance operation.
1. At full signal strength. Limit number of obstructions to ensure best performance.
2. Camera and receiver require a wired connection to a power outlet. Power adapters included.
3. Using multiple receivers in close proximity to each other may cause a slight slowdown in frame rate performance. Maintain at
least 4 inches / 10cm of space between each receiver. Limit number of receivers used to 2 (4 channels total).
4. Maximum wireless transmission range. Actual range dependent upon building materials and other obstructions in path of
wireless signal.
5. Not intended for submersion in water. Installation in a sheltered area is recommended.
6. Power cables are only weatherproof when fully inserted at the connection point. Power cables may not be submerged in water.
7. Stated IR illumination ranges are based on ideal conditions in typical outdoor night time ambient lighting and in total darkness.
Actual range and image clarity depends on installation location, viewing area, and light reflection / absorption level of object.
viii
2
.
4
.
7
.
1
.
5
.
6
.