HTC Touch Diamond DIAM100 User Manual page 131

Htc america mobile phone user manual
Table of Contents

Advertisement

1.
The network names of the detected
wireless networks are displayed on
a pop-up message window. Tap the
desired wireless network, then tap
OK.
Note When you select an open (unsecured)
network, you will be automatically
connected to the network after
tapping OK. You do not need to do
steps  and .
2.
On the next pop-up message window,
do one of the following:
Tap The Internet if the wireless
network connects your device to
the Internet.
Tap Work if the wireless network
connects your device to a private
network.
3.
Enter the key and then tap Connect.
Next time you use your device to detect wireless networks, you will not see
the pop-up message windows again, and you will not be prompted to enter
the network key of the previously accessed wireless network (unless you
perform a hard reset which will erase custom settings on your device).
Note
Wi-Fi networks are self-discoverable, which means no additional steps are
required for your device to connect to a Wi-Fi network. It may be necessary
to provide a username and password for certain closed wireless networks.
Internet 11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Touch touch diamond

Table of Contents