Subnet Mask - Oce WP28 Operation Manual

Interface
8
Press the > key. Each time the
changes as shown below.
>>DHCP
Off
>>IP Address
000.000.000.000
>>Subnet Mask
000.000.000.000
>>Gateway
000.000.000.000
9
Display the item to be set and press the ENTER key.
For DHCP , a question mark (?) appears. For IP Address, Subnet
Mask, and Gateway, the cursor (
10
For DHCP, select On or Off using the
Subnet Mask, and Gateway addresses, press the
change the number (000 to 255) where the cursor is blinking. You
can use the > and < key to move the cursor right and left.
To obtain these addresses, consult your network administrator.
11
Press the ENTER key.
12
Press the MENU key. The message display returns to Ready.
or
) blinks.
1-80
key is pressed, the item
or key. For IP Address,
or key to