Creating A Modem Dial-Up Connection - HTC Imagio User Manual

Note If you are in GSM mode, you must set the Access Point Name. To do this, in the Modems tab, select the
Bluetooth modem listed and then click Properties. Click the Advanced tab, then in the Extra initialization
commands text box, enter:
AT+CGDCONT=1,"IP","APN"
where APN is the access point name provided by Verizon to give you access to the Internet. Then click OK.
6. Click OK to exit the Phone and Modem Options.
Your phone is now set up as a Bluetooth modem.

Creating a modem dial-up connection

Once the notebook recognizes your phone as a modem, create a new modem dial-up connection on your
notebook. You can then use this connection to dial up and connect to the Internet. The procedures are different
for Windows Vista™ and Windows XP.
To set up a modem dial-up connection in Windows Vista™
1. On your notebook, click Start > Control Panel.
2. Double-click Network and Sharing Center.
3. On the left-hand panel of the Network and Sharing Center, click Set up a connection or network.
4. Click Set up a dial-up connection then click Next.
5.
Enter the following information: dial-up phone
number (#777), your user name and password.
Also select the Remember this password check
box.
6. When you have finished entering the
information, click Connect. Your notebook then
starts to dial up to the Internet using your phone
as a modem.
7.
When you see a dialog box that shows you are
connected to the Internet, click Close.
8.
In the Set Network Location dialog box, choose
the type of location where you will use the dial-
up connection.
Internet 103