Table of Contents
Advertisement
88 Internet
Create a modem dial-up connection
After your notebook recognizes your device as a modem, create a modem dial-up connection on your
notebook.
To set up a modem dial-up connection in a Windows Vista notebook
1.
On your notebook, click Start > Control Panel.
2.
Double-click Network and Sharing Center.
3.
On the left-hand panel of the Network and Sharing Center, click Set up a connection or network.
4.
Click Set up a dial-up connection then click Next.
5.
Enter the following information: dial-up phone number (#777), your user name and password. Also
select the Remember this password check box.
6.
When you have finished entering the information, click Connect. Your notebook then starts to dial up
to the Internet using your device as a modem.
7.
When you see a dialog box that shows you are connected to the Internet, click Close.
8.
In the Set Network Location dialog box, choose the type of location where you will use the dial-up
connection.
Advertisement
Table of Contents
