Table of Contents
Advertisement
Preparation for use and operation
Manual removal (emergency removal)
For normal removal of Zip disks, the workstation must be switched on. If the power supply of the
workstation is interrupted, the Zip disk can be removed manually.
Ê
Switch off the workstation.
Ê
Press a piece of wire (e. g. a paper clip) firmly into the opening.
The Zip disk is unlocked. You can now pull it out of the drive.
Only use the disk emergency removal function when no battery is installed in the
!
workstation and no power supply unit is connected to the workstation.
32
Zip drive
A26391-K82-Z110-1-7619
Advertisement
Table of Contents
