Table of Contents
Advertisement
Preparation for use and operation
Please read the "Important notes" in the previous chapter.
!
You must charge the batteries of workstation and keyboard and install the application programs
before you can work with the workstation. The operating system and drivers required are
preinstalled.
When not plugged into a power outlet, the workstation runs on its built-in battery. You can increase
the battery's life by enabling the system's energy saving functions.
If you use the workstation in a normal office situation, you run it off the mains with the aid of the
power adapter, or in a QuickPort S.
The chapter on
"Connecting external
(e. g. mouse, printer) to the workstation.
Unpacking and checking the delivery
Ê
Unpack all the individual parts.
Ê
Check the delivery for damage incurred during transportation.
Ê
Check whether the delivery agrees with the details in the delivery note.
Ê
Check whether all necessary details have been entered on the first page of the guarantee
coupon booklet.
Should you discover that the delivery does not correspond to the delivery note, notify your local
sales outlet immediately.
Do not discard the original packing material of the devices. Keep it for future
i
transportation.
Selecting parking location
Select a suitable location for the workstation before setting it up. Consider the following points when
looking for a location.
•
It is recommended that you place your workstation on a surface with good anti-slip qualities. In
view of the multitude of different finishes and varnishes used on furniture, it is possible that the
rubber feet of the workstation will mark the surface they stand on.
•
Do not expose the workstation to extreme environmental conditions. Protect it from dust,
humidity and heat.
•
Keep other objects 100 mm away from the workstation and its power adapter to ensure
adequate ventilation. The space between the workstation's feet must be clear.. Do not place
the workstation on a soft surface (e. g., a carpet or soft furnishings). Do not cover the
ventilation slots in the workstation and the power adapter.
•
The power adapter must be at least 200 mm away from the workstation. It must be free-
standing and must not be covered. Do not place the power adapter on heat-sensitive material.
A26391-K82-Z110-1-7619
devices" has instructions on how to connect external devices
9
Advertisement
Table of Contents
