Pedestal Installation (Washer And Dryer) - GE DPVH880EJ Technical Service Manual

Pedestal Installation (Washer and Dryer)

Optional 12-inch-high storage drawer pedestals
with dividers are available to provide convenience
and extra storage space for detergent, dryer
sheets, and other cleaning supplies. The pedestal
installation kit includes 4 support pads, 4 mounting
screws, and a drawer divider.
WARNING!
Due to the size and weight of these products, and
to reduce the risk of personal injury or damage to
the product, two people are required for proper
installation.
Kit Contents
4 Support Pads
4 Mounting Screws
Drawer Divider
Tools Needed
Phillips-head Screwdriver
9/16" Open End Wrench
or Adjustable Wrench
8 mm Socket Wrench
Spirit Level
Installation Preparation
• Remove the packaging.
• The drawer divider is taped at the top of the
shipping carton. Remove the divider and set
aside for fi nal installation.
• Flatten the product carton to use as a pad to lay
the washer or dryer down on its side. Continue
using the carton to protect the fi nished fl oor in
front of the installation location.
To install the pedestal:
1. Carefully lay the washer or dryer on its side to
access the leveling legs on the bottom of the
appliance.
Caution: Do not lay the washer or dryer on its back!
Note: Use an open-end wrench to remove the
washer or dryer leveling legs.
– 20 –
Back out and remove
all 4 leveling legs
(Continued Next Page)