Table of Contents
Advertisement
132 Getting Connected
To increase security on the Wi-Fi network
The LEAP (Lightweight Extensible Authentication Protocol) feature of
Comm Manager helps increase security on your phone, and ensures that
nobody is able to access your network without your permission.
1.
On the Wi-Fi Settings screen, select LEAP.
2.
Select Menu > New.
Note
3.
Enter the SSID (Service Set Identifier).
You can obtain this information from T-Mobile.
4.
Enter the user name, password, and domain.
5.
Select an Authentication Type. By default, the Authentication Type
for your phone is Open System authentication.
Note
8.4 GPRS/EDGE
You can use GPRS/EDGE to connect to the Internet or to send and receive
Picture Messages on your phone. You need a data plan to access the
T-Mobile GPRS/EDGE network.
Note
To set up a new GPRS/EDGE connection
If GPRS/EDGE settings are not preset on your phone or are accidentally
deleted, obtain the Access point name from T-Mobile. Also, check with
T-Mobile if a user name and password are required.
1.
On the Home screen, select Start > Settings > Connections > GPRS
> New.
2.
In Description, enter a name for the connection.
3.
In Connects to, select The Internet.
By default, the LEAP screen displays data that you entered previously.
However, you can modify or delete the data as required by selecting
Menu > Modify or Menu > Delete on the LEAP screen.
For LEAP to work correctly, the receiving phone (your phone) must be set
with the same SSID, user name, and password as the access point.
T-Mobile GPRS/EDGE settings are already preconfigured and modifying them
may cause services to stop working.
Advertisement
Table of Contents
