BIOS
Resume By Alarm
When set to Enable alarm resume, you can set the date (of month) and time (hh:mm:
ss), that will awaken a system which has been powered down.
Options: Enabled, Disabled.
4-6 PNP/PCI/PCI-E Configuration
This page lets the user to modify the PCI/PCI-E IRQ signals when various PCI/PCI-E
cards are inserted.
WARNING: Conflicting IRQ's may cause system unable to locate certain devices.
Figure 7: PNP/PCI/PCI-E Configuration Setup
Init Display First
This item is used to select whether to initialize the VGA or PCI first when the system
boots.
Options: PCI Slot, onboard, PCIEx.
Resources Controlled By
Determines what controls system PNP/PCI resources. The default is Auto (ESCD).
Manual: PNP Card's resources are controlled manually. The "IRQ Resources" field
becomes available and you can set which IRQ-X and DMA-X are
assigned to PCI and onboard devices.
Auto:
BIOS assigns the interrupt resource automatically.
Page 4-16