HP P4000 SAN User Manual page 26

Best practices for deploying citrix xenserver

Hide thumbs Also See for P4000 SAN:

Table of Contents

Figure 17. Naming the SR XPSP2-01

As shown in Figure 18, specify the target host for the SR as 1.1.1.225 (the virtual IP address of the

HP StorageWorks iSCSI SAN cluster).

Next, select Discover IQNs to list visible iSCSI storage targets in a drop-down list. Match the Target

IQN value to the IQN of volume XPSP2-01 as shown in the CMC.

Select Discover LUNs; then specify LUN 0 as the Target LUN, forcing iSCSI to be presented at LUN

0 for each unique target IQN.

Select Finish to complete the creation of the new SR.

Table of Contents

Storageworks p4000 san