HP P4000 SAN User Manual page 23

Figure 13. New Server dialog box
Enter the name XenServer-55b-02. Note that you can choose any name; however, matching the
3.
XenServer host name to the authentication method name implies the relationship between the two
and makes it easier to assign iSCSI volumes in the CMC.
Check Allow access via iSCSI.
Check Enable load balancing.
Under CHAP not required, enter the IQN of the host (iqn.2009-06.com.example:e834bedd) in the
Initiator Node Name field.
After you have created the XenServer-55b-02, you can assign volumes and snapshots.
4.
Under the Volumes and Snapshots tab, select TasksAssign and Unassign VolumesSnapshots.
Alternatively, select TasksVolumeEdit VolumeSelecting the VolumeBasic tabAssign and
Unassign Servers. The former option focuses on assigning volumes and snapshots to a particular
server (Figure 14); the latter on assigning servers to a particular volume (Figure 15).
Assign access for volume XPSP2-01 to the XenServer-55b-02.
Specify access as None, Read, or Read/Write.
23