License Plate Lamp
To replace one of these bulbs:
1. Remove the screws for either of the license plate
lamps.
2. Turn and pull the license plate lamp forward
through the fascia opening.
3. Turn the bulb socket counterclockwise and pull the
bulb straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the license
plate lamp.
5-60
Replacement Bulbs
Exterior Lamps
Back-Up Lamps
Fog Lamp
Front Turn Signal and
Parking Lamps
Headlamps
High-Beam Headlamp
Low-Beam Headlamp
Front/Rear Sidemarker, License
Plate Lamp, and Taillamp
Stoplamps and Taillamps
For replacement bulbs not listed here, contact your
dealer/retailer.
Bulb Number
921
H11
3157NAK
H9
H11
194
3057