38
STEP2 Creating and printing a label
Setting the cut options: Menu 8
There are three options, cutting after each label, not cutting labels, or cutting the last
label only.
1
Press the Menu button in Time Display mode.
Menu Selection mode is displayed.
2
Press the up or down arrow buttons
( / ) to select "Auto cut" and press OK
button.
3
Select a function you want to use using
the up or down arrow buttons ( / ) and
press OK button.
The setting is saved and the screen returns to
Time Display mode.
Function
Auto Cut
OFF
Cut at End
Setting the language: Menu 9
1
Press the Menu button in Time Display mode.
Menu Selection mode is displayed.
2
Select "Menu 9" using the up or down
arrow buttons ( / ) and press OK
button.
3
Select the language using the up or down
arrow buttons ( / ) and press OK
button.
The setting is saved and the screen returns to
Time Display mode.
When selecting other than "English - US", the unit is "mm". If you want to use "inch",
refer to
Cuts each label after printing.
Does not cut labels.
Cuts only the last label printed.
"Setting the unit of measure (inch or mm): Menu 10".
Menu
Auto Cut
Auto Cut
Auto Cut
Description
001
002
003
001 002 003 004 005 006 ...
001 002 003 004
Menu
Language
Language
English - US
8/12
004
9/12