Setting Cut Options - Brother P-touch PT-E300 User Manual

EDITING A LABEL
The tape cutting options allow you to specify how the tape is fed and cut when printing labels.
In particular, the "Chain" option greatly reduce the amount of wasted tape by using smaller
margins and eliminating blank sections cut between labels. Depends on labeling application
type, the setting value is fixed or limited.
1
Press the Style key to display the Label menu.
2
Select "Cut Option" using the
by using the
3
Press the OK or Enter key to apply the settings.
New settings are NOT applied if you do not press the OK or Enter key.
• Press the Escape key to return to the previous step.
• Refer to the Tape Cutting table for a list of all available settings.
Setting
• Each label is printed, leaving a margin of 0.94"
Large
Margin
• A margin of 0.91" (23 mm) is fed before printing
Small
Margin
• Use this setting when printing several labels with
Chain • A margin of 0.91" (23 mm) is printed first, and
• Use this setting when printing Heat Shrink Tube.
• Pressing the Shift key and then the Preview key
No Cut
39

Setting Cut Options

Setting Cut Options
or key.
Tape Cutting Options
Description
(24 mm) on each end.
each label. The printed label has a margin of 0.16"
(4 mm) before and after the text.
minimum margins.
then each label is printed, leaving a margin of
0.16" (4 mm) before and after the text.
feeds the last printed label and cut it.
or key, and then set the value
Example
0.94" (24 mm)
ABC
0.94" (24 mm)
0.91" (23 mm)
ABC
0.16"
0.16"
(4 mm)
(4 mm)
ABC ABC
0.16"
(4 mm)
0.94" (24 mm)
ABC
0.16"
(4 mm)