Deleting A Call From A Call List; Call Alert Operation; Receiving And Responding To A Call Alert; Making A Call Alert From The Contacts List - Vertex Standard VXD-720 Operating Manual

n

Call Alert Operation

Call Alert paging enables you to alert a specific
radio user to call you back when they are able to
do so.
This feature is applicable for subscriber aliases or
IDs only and is accessible through the menu via
Contacts or manual dial.

1 Receiving and Responding to a Call Alert

When you receive a Call Alert page, you see "Call
Alert" that alternates with the alias or ID of the
calling radio on the display.
Procedure:
1 You hear a repetitive tone. The LED blinks yel-
low.
2 Press the PTT button within four (4) seconds of
receiving a Call Alert page to respond to the Pri-
vate Call.
OR
Press to select "Ignore?" and to exit the Call
Alert.

1 Making a Call Alert from the Contacts List

Procedure:
1 to access the menu.
2 or to "Contacts" and press
3 or to the required subscriber alias or ID
and press to select.
OR
or to "Manual Dial" and press
lect.
A blinking cursor appears. Enter the subscriber
ID you want to page and press
4 or to "Call Alert" and press
5 The display shows "Call Alert: <Subscriber Alias
or ID>", indicating that the Call Alert has been
sent.
6 The LED lights up solid green when your radio
is sending the Call Alert.
7 If the Call Alert acknowledgement is received,
a tone sounds and the display shows "Call Alert
Successful".
OR
If the Call Alert acknowledgement is not re-
ceived, a tone sounds and the display shows
"Call Alert Failed".
to select.
to se-
.
to select.
63