2. Use the
pointer button to highlight the desired option, then
adjust it as needed:
■
Auto Setup
Leave this setting
images. Turn it off if you want to save adjustments you have
made to the Tracking, Sync, and Position settings.
■
Tracking
Adjust this value to eliminate vertical stripes in computer
images.
■
Sync
Adjust this value if computer images appear blurry or flicker.
■
Progressive
For composite video and S-video only. Turn this setting
to convert interlaced signals into progressive signals (best for
still images). Leave the setting
■
Position
If the image is slightly cut off on one or more sides, it may not
be centered exactly. Select this setting and use the
button to center it.
■
Computer1 Input
Computer2 Input
If the colors don't look right on the
setting for the type of equipment you've connected to the
or
Computer1
: For a computer or RGB-video connection.
RGB
: For a video player that outputs a component
Component
video signal (with connectors labeled Y/Cb/Cr or Y/Pb/Pr).
■
Video Signal
Leave this setting at
system (then select
■
Resize
Choose an aspect ratio of either
can also select
subtitles or supertitles.
computer connection.
to automatically optimize computer
On
for moving images.
Off
Auto
port:
Computer2
unless you are using a 60-Hz PAL
Auto
).
PAL60
or
4:3
or
16:9 (Up)
16:9 (Down)
is the default setting for a
Normal
On
pointer
setting, select the
. For videos, you
16:9
to accommodate
Fine-Tuning the Projector
note
You can also use the remote
control's
button to
Auto
automatically reset the
projector's Tracking, Sync,
and Position settings. See
page 81 for details.
53