Setting The Projector Id - Epson PowerLite 1810p User Manual

Use the pointer button to move the pointer on the screen.
■
■ Press the button once to left-click, or press it twice to
Enter
double-click. Press the
To drag-and-drop, hold down the
■
pointer button to drag the object. When it's where you want it,
release the button.
Enter
Operating Two or More Projectors with
the Remote Control
If you're using more than one projector, you can control all the
projectors—or just selected ones—by using the projector ID system.
To operate a projector, you have to set the remote control's ID to
match that of the projector. Or you can control all the projectors at
once by setting the remote control's ID to zero.

Setting the Projector ID

The projector's default ID is set to Off. This lets it respond to
commands from any remote control. To change the ID, follow these
steps:
1. Press the button on the remote control. You see the
Menu
projector's menu screen.
2. Select
Extended > Projector ID
3. Use the pointer button to highlight the new ID, and press
to select it.
Enter
button to right-click.
Esc
button. Then use the
Enter
.
Presenting with the Remote Control
33