BMW 2006 328i Owner's Manual page 37

The driver's seat and exterior mirror posi-
tions are stored for the remote control cur-
rently in use.
Automatic call-up
The driver's seat position last stored is stored
for the remote control currently in use.
You can select the occasion on which the seat is
reset to that position.
> Call-up when the vehicle is unlocked
> Call-up when the driver's door is opened.
When this Personal Profile function is
used, first make sure that the footwell
behind the driver's seat is free of obstacles.
Failure to do so could cause injury to persons or
damage to objects as a result of a rearward
movement of the seat.<
The adjusting procedure is halted when you
touch a seat adjustment switch or one of the
MEMORY buttons.
Activating/deactivating automatic call-
up
For operating principle refer to page 58.
1. Lightly push button 1 in the turn indicator
stalk up or down repeatedly until the symbol
appears in the display accompanied by the
word "SET".
2. Press button 2.
3. Lightly push button 1 in the turn indicator
stalk down repeatedly until the symbol
appears in the display.
4. Press button 2.
5. Use button 1 to select:
>
Call-up when the vehicle is unlocked.
>
Call-up when the driver's door is
opened.
>
Switch off automatic function.
6. Press button 2.
The setting is stored.
Manual call-up
Do not call up memory while you are driv-
ing, otherwise unexpected seat move-
ment could result in an
Convenience mode
1. Unlock and open the driver's door or switch
on radio readiness, refer to page 41.
Briefly press the desired memory button 1
2.
or 2.
The adjusting procedure is halted when you
touch a seat adjustment switch or one of the
MEMORY buttons.
Safety feature
1. Close the driver's door and switch the igni-
tion on or off, refer to page 41.
2. Press the desired memory button 1 or 2
and maintain pressure until the adjustment
process has been completed.
accident.<
35