Central Locking System; Opening/Closing From Outside; Unlocking - BMW 2006 328i Owner's Manual

>
Automatic climate control
gram, activating/deactivating cooling func-
tion and automatic recirculated-air control,
setting temperature, air flow rate and distri-
bution, refer to page
> Audio volume, refer to separate Owner's
Manual
> Speed-dependent volume control, refer to
separate Owner's Manual

Central locking system

The concept
The central locking system is ready for opera-
tion whenever the driver's door is closed.
The system simultaneously engages and
releases the locks on the following:
> Doors
>
Luggage compartment lid
> Fuel filler door
Operating from outside
> Via the remote control
> Via the door lock
> In cars with convenient access
handles on the driver's and front passen-
ger's doors
The anti-theft system is operated at the same
time. It prevents the doors from being unlocked
using the lock buttons or door handles. In addi-
tion, if the remote control is used, the welcome
lamps, interior lamps and the door's courtesy
*
lamps are switched on or off. The alarm sys-
*
tem is also armed or disarmed.
For further details of the alarm system, refer to
page 24.
Operating from inside
By means of the button for central locking, refer
to page 21.
In the event of a sufficiently severe accident, the
central locking system unlocks automatically. In
addition, the hazard warning flashers and inte-
rior lamps come on.
*
: AUTO pro-
80 ff
*
, via the
Opening and closing: from
outside
Using the remote control
Persons or animals in a parked vehicle
could lock the doors from the inside. You
should therefore take the remote control with
you so that the car can be opened from the out-
side.<

Unlocking

Press the button.
The interior lamps, the courtesy lamps
welcome lamps come on.
You can also set the way in which the car is
unlocked. The setting is stored for the remote
control currently in use.
For operating principle refer to page 58.
1. Lightly push button 1 in the turn indicator
stalk up or down repeatedly until the symbol
appears in the display accompanied by the
word "SET".
2. Press button 2.
3. Lightly push button 1 in the turn indicator
stalk down repeatedly until the symbol
appears in the display.
4. Press button 2.
*
and the
19