Additional Handsets And Bases; Register A New Handset To Your Base - BT Studio 1500 User Manual

Additional handsets and bases

Up to 5 handsets can be registered and operated from
the BT Studio 1500 base.
Each handset can be registered with up to four bases.
If you buy new handsets to use with your BT Studio 1500
they will have to be registered to the base before you can
use them.
Register a new BT Studio 1500 handset to your BT
Studio 1500 base
1. At the base: Press and hold
you hear two beeps. You now have 90 seconds to register
the handset.
2. At the handset: press
press .
to REG BASE and press
3. Scroll
4. Enter the base number (1–4). The numbers flashing are
already in use.
5. Press . When the handset finds the base signal, the
base identification number is displayed.
6. The display will ask for the PIN to be entered. Enter the
PIN (the default setting: 0000). You will hear a beep.
The handset is now registered.
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
BT Studio 1500 – Issue 3 – Edition 01 – 18.10.06 – 7875
Page for 3 seconds until
to REGISTER and
, scroll
.
Please note
Handsets that were supplied with
your BT Studio 1500 base are
already registered to it as HS-1, HS-
2 etc.
Each additional handset you buy
must be registered with the base.
IMPORTANT
Before registration, make sure the
handset batteries are fully charged
and that you are close to the base.
47