Adjust Performance Tab - Epson EasyMP Multi PC Projection Operation Manual

Set Options
Windows only
Switch LAN
This is used to switch the network adapter to be used for a
search when a computer has multiple adapters.
By default, all of the network adapters are used to perform a
search. When a wired LAN is always used as the connection
method, select a wired LAN adapter.
You can reset all adjustment values for Set options to their
Restore Defaults
default settings. However, you can retain the setting for
Switch LAN in General settings.

Adjust Performance Tab

Performance The performance can be set to Fast, Normal, and Fine.
adjustment slider Set to Fast when movie projections are interrupted.
Only available for projectors with a resolution of WUXGA
Lower the
(1920x1200).
resolution and
Select to reduce the size of the data to be transferred to the
transfer
projector by lowering the resolution. Use this option on a
slow network or when displaying the image takes too long
or is interrupted. (This is not available when dividing the
projected screen in two or four.)
Windows XP only
Transfer layered
window
The layered window is in use when contents such as
messages displayed on the computer are not projected by
the projector. Select this check box to project contents such
as messages that use the layered window.
If the mouse pointer flickers on the screen, select Make the
movement of the mouse pointer smooth in General
settings.
Displays EasyMP Multi PC Projection version
Version
information.
You can reset all adjustment values for Set options to their
Restore Defaults
default settings. However, you can retain the setting for
Switch LAN in General settings.
42