Error Message When Operating A Profile - Epson EasyMP Multi PC Projection Operation Manual

Error Message List

Error Message when Operating a Profile

Error Messages
Enter max. 32 characters.
Enter a folder name.
Folders should not be created more than 6 layers deep.
There is already a folder named XXX in this folder.
There is already a projector file named XXX in this folder.
Cannot import. Format not supported by this application.
Cannot import because the folder structure exceeds six folders.
Cannot move because the folder structure exceeds six folders.
The entered text exceeds 32 characters. Shorten the name to 32 characters or less.
No folder name entered. Enter a folder name.
The folder structure is deeper than six folders. Create the new folder higher up in the folder structure.
A folder with the same name already exists. Enter another name.
A projector with the same name already exists. Enter another name.
Check the profile you want to import. You cannot import a profile for projectors connected using Quick connection
mode in EasyMP Network Projection.
Also, you cannot import when projector information has not been registered, or when the profile is corrupt.
If you import, the folder structure will exceed six layers. Import to a folder higher up in the folder structure.
If the folder is moved, the folder structure will exceed six folders. Import to a folder higher up in the folder structure.
Remedy
38