Technical Specifications - HP StorageWorks SB40c Specification

QuickSpecs

Technical Specifications

HP StorageWorks
SB40c storage blade
Smart Array P400
Controller
Dimensions (HxWxD)
Weight (unloaded)
Weight (loaded)
Protocol Support
O/S Support
LED Indicators
Drive LED Indicators
(on drive trays)
Relative Humidity (non-
condensing)
Temperature Range
NOTE: To maintain proper cooling and airflow, a drive blank or drive must occupy all bays during
operation.
Disk Drive and
Enclosure Interface
SAS Connectors
Cache Memory Speed DDR2-533MHz with provides up to 4.2 GB/s maximum bandwidth.
SAS Speed
Cache Memory
Logical Drives
Supported
Maximum Logical
Drive Capacity
Host Memory
Addressing
RAID Support
Upgradeable Firmware Upgradeable Firmware with recovery ROM feature
DA - 12587 Worldwide QuickSpecs — Version 7 — 9/12/2007
HP StorageWorks SB40c storage blade
2.19 x 7.154 x 20.058 in (5.56 x 18.17 x 50.95 cm)
8 lb (3.63 kg)
11 lb (4.99 kg)
3Gb/s SAS
1.5Gb/s SATA
Defined by specific HP array controller or SAS/SATA adapter used;
please refer to the QuickSpecs and/or User Guide of the specific array
controller or adapter
UID
System Health LED
Drive LED (top) - On-line/Activity
Drive Failure LED (bottom) - Drive Fault/Locate
Operating
Shipping
Operating
Shipping
3G SAS (Serial Attached SCSI)
1.5G SATA (Serial Advanced Technology Attachment)
2 internal (SFF8484) x4 wide port connectors
x8 3G SAS provides 2.4GB/s maximum bandwidth.
40-bit 256MB cache; ECC protection, battery-backed, and transportable
Up to 32 logical drives
876GB (6 x 146GB)
64-bit, supporting greater than 4GB server memory space
RAID 6 with ADG (Advanced Data Guarding)
RAID 5 (Distributed Data Guarding)
RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping)
10% to 90%
5% to 95%
50° to 94° F (10° to 35° C°)
-22° to 140° F (-30° to 60° C)
Page 9