Searching An Input Signal; Selecting An Aspect Ratio - Dukane 8793H User Manual

Searching an input signal

1.
Press SEARCH button on the remote control.
The projector will start to check its input ports as below in
order to fi nd any input signals.
When an input is found, the projector will stop searching
and display the image. If no signal is found, the projector will
return to the state selected before the operation.
COMPUTER IN1  COMPUTER IN2
VIDEO
● While ON is selected for AUTO SEARCH item in OPTION menu (51), the
projector will keep checking the ports in above order repeatedly till an input
signal is detected.

Selecting an aspect ratio

1.
Press ASPECT button on the remote control.
Each time you press the button, the projector switches the
mode for aspect ratio in turn.
 For a computer signal
NORMAL  4:3  16:9  16:10
 For an HDMI
NORMAL  4:3  16:9  16:10  14:9
 For a video signal, s-video signal or component video signal
4:3  16:9  14:9
 For no signal
4:3 (fi xed)
● ASPECT button does not work when no proper signal is inputted.
● NORMAL mode keeps the original aspect ratio setting.
S-VIDEO HDMI
signal
TM
Operating
SEARCH button
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
＋
DOWN
OFF
ー
MY BUTTON
KEYSTONE MUTE
1 2
POSITION MENU
ENTER
ESC
RESET
ASPECT button
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
FREEZE
MAGNIFY PAGE VOLUME
UP
ON
＋
DOWN
OFF
ー
MY BUTTON
MUTE
KEYSTONE
1 2
POSITION MENU
ENTER
ESC RESET
21