Hunter 44273 Owner's Manual page 16

5. Use the
for the period and press
adjust the end time on the right of the screen for this scheduled period.
Press again.
Next
6. Set the temperature for your heating cycle as indicated by the flashing
heat to arrow on your screen. Use the
temperature and press
indicated by the flashing the cool to arrow. Set this temperature with your
or buttons and hit
7. The thermostat will start this process again for "Asleep". Repeat steps 1-5
to schedule the time and set the temperature for your sleep period. When
finished pressed
8. When setting "At Home", you will only be asked to set a temperature. The
thermostat calculates your "At Home" time by what remains unscheduled
from your "Away" and "Asleep" periods. Set your "Heat To" temperature
first and press
Scheduling.
9. If you are scheduling the day periods in order (Weekdays, Saturday, then
Sunday), the screen will flash "Updated!"and take you to the next period.
10. When you have completed all scheduling, press
11. If you skipped a section, or are only programming a weekend day, the
Thermostat will show "Updated!" and return you to the Home screen.
16
Setting Your Schedule
or buttons to adjust the start time on the left of the screen
Next
. You will be asked to set your cooling cycle,
Next
Next
to get to "At Home".
Next
, then Set your "Cool To" temp and press
Next
. Again you will use the
and
.
44129-01 • 07/23/2012
or buttons to
buttons to change the
to finish
Next
to finish.
Done/
Home