D Receiving A Test Acknowledgement Call - Icom IC-GM651 Instruction Manual

D Receiving a Test Acknowledgement call

q While monitoring Channel 70 and a Test Acknowledge-
ment call is received:
• The alarm sounds depending on the received category.
- Push [CLR] to stop the alarm.
• "Received Test ACK" appears in the display.
25W
Received
Test ACK
<Station 1
Push
Received
Test ACK
<Station 1
After receiving the Test Ac-
knowledgement from Station 1.
• " " means "from."
<
w Rotate [SELECTOR] to indicate the received message
log.
• Push [CLR] to exit the condition.
INT
Blinks
25W INT
Blinks
e The received message log is displayed.
• Push [CLR] to cancel and back to the previous screen.
• Push [F], then push [8•
PRT
sage information.
--DSC LOG--
Test ACK
From Station 1
Safety
Push
r Push [ENT] to return to the normal operation condition.
6
DSC OPERATION
] to print out the received mes-
to Exit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
91