Getting Started; Battery Installation; Battery Notice - VTech Mini Laptop User Manual

GETTING STARTED

BATTERY INSTALLATION

1. Make sure the unit is OFF.
2. Locate the battery cover on the bottom of
the unit.
3. Install 3 new "AA" (AM-3/LR6) batteries
following the diagram inside the battery
box. (The use of new, alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover.

BATTERY NOTICE

• The use of new alkaline batteries is recommended for maximum
performance;
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before being
charged (if removable).
• Rechargeable batteries are only to be charged under adult
supervision (if removable).
• Different types of batteries or new and used batteries are not to be
mixed.
• Only batteries of the same or equivalent type as recommended are
to be used;
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• The toy is not to be connected to more than the recommended
number of power supplies.
• Do not dispose of batteries in fire.
NOTE: If the unit suddenly stops working or the sound becomes weak,
turn the unit off for 15 seconds, then turn it back on. If the problem
persists it may be caused by weak batteries. Please install a new set
of batteries and try the unit again.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.
3