Table of Contents
Advertisement
Using the Phone Web User Interface
Saving the Configuration Profile
STEP 3
STEP 4
STEP 5
Saving the Configuration Profile
Setting Voice System Parameters
Cisco Small Business SPA50X and SPA51X Series SPCP IP Phone User Guide
To change the status of the Web Server Writable, press Edit.
If the option to edit the parameter is not displayed, press **# to display the option.
If the edit option does not display after a few seconds, it might be set by your
phone system administrator such that you cannot modify this parameter.
Press Y/N to toggle the parameter and press OK to set the parameter.
To save your change, press Save.
Click Submit All Changes when you have finished modifying the fields in the
phone web user interface to update the configuration profile. The phone is
rebooted and the changes are applied.
Click Undo All Changes if you want to clear all changes made this session and
return to the parameter values set before the session began or since the last time
you clicked Submit All Changes.
The voice system parameters control password protection for the phone
configuration profile and the values used to identify the phone to the network.
Typically a user should not modify these parameters.
The table identifies and describes the parameters in the System tab.
Parameter
Enable Web
Server
Web Server Port
Description
Choose yes to enable the phone web server that allows a
user to view the phone web user interface. Choose no to
disable the web server.
Port number for the web server.
5
47
Advertisement
Table of Contents
