Mounting The Phone To The Wall (Optional) - Cisco SPA50X User Manual

Installing Your Phone

Mounting the Phone to the Wall (Optional)

STEP 1
STEP 2
Mounting the Phone to the Wall (Optional)
Cisco Small Business SPA50X and SPA51X Series SPCP IP Phone User Guide
To install the desk stand:
Connect the phone stand by lining up the tabs on the stand with the slots on the
phone body.
Slide the bottom tabs into the lower slots on the phone body and lightly press
down on the stand. It should easily slide into the upper stand slots. Do not force it.
To mount the phone to the wall, you must use the MB100 wall mount bracket kit
(available separately).
Figure 2 MB100 Wall Mount Kit
2
20