Basics; Charging The Battery; Turning The Headset On And Off; Pairing The Headset With Compatible Devices - Sony MBH10 User Manual

Basics

Charging the battery

Before using the Mono Bluetooth™ Headset MBH10 for the first time, you need to
charge the headset for approximately 2.5 hours. Sony chargers are recommended.
To charge the battery
1 Plug one end of the USB cable into the charger (or into the USB port of a
computer).
2 Plug the other end of the cable into the Micro USB port on your Mono
Bluetooth™ Headset MBH10.

Turning the headset on and off

To turn on the headset
• Press and hold down the Power key until the notification light turns green.
To turn off the headset
• Press and hold down the Power key until the red notification light flashes once.

Pairing the headset with compatible devices

Before you can use the headset, you need to pair it with a Bluetooth™ compatible
device, for example, a phone. There are two ways to pair the headset: manually, and
automatically using NFC. After successful pairing, the headset connects to the
Bluetooth™ compatible device as soon as the headset is turned on and within range.
After that, you can also pair the headset with a second Bluetooth™ compatible
device in the same way.
To manually pair the headset with a Bluetooth™ device
1 Make sure the Bluetooth™ device has the Bluetooth™ function turned on.
2 Turn off the headset.
3 Headset: Press and hold down the Power key until a green notification light
starts flashing rapidly.
4 Bluetooth™ device: Scan for Bluetooth™ devices, then select MBH10 in the
list of available devices.
5 Bluetooth™ device: Follow the pairing instructions that appear. If a passcode
is required, enter "0000".
This is an Internet version of this publication. © Print only for private use.
5