Dynamic Forwarding - Yealink SIP-T22 User Manual

User Guide SIP-T22P/SIP-T22 IP Phone
Press the Save soft key to accept the change.
To disable call forward in custom mode for a specific account:
1. Press Me nu->Features->Call Forward or press
2. Press
3. Press
key.
4. Press
5. Press the Save soft key to accept the change.

Dynamic Forwarding

To f orward an incoming call to another party:
1. When the phone is ringing, press the F wd soft key.
2. Enter the number you want to forward the incoming call to.
3. Press
The incoming call is forwarded. The LCD screen prompts a call forward message.
You can transfer a call to another party in one of the three ways:
Blind Transfer: Transfer a call directly to another party without consulting.

Se mi-Attended Transfer: Transfer a call when receiving ringback.

A t tended Transfer: Transfer a call with prior consulting.

To perform a blind transfer:
1. Press
2. Enter the number you want to transfer the call to.
3. Press
Then the call is connected to the number to which you are transferring.
To perform a semi-attended t ransfer:
1. Press
84
or to select the desired account, then press the Enter soft key.
or to select the desired forwarding type, then press the Enter soft
, or the Switch soft key to select Dis able to disable the call forward.
, , or the Se nd soft key.
or the Tran soft key during a call.
or the Tran soft key to complete the transfer.
or the Tran soft key during a call.
when the phone is idle.