Hotline - Yealink SIP-T22 User Manual

User Guide SIP-T22P/SIP-T22 IP Phone
3. Enter the desired delay time in the Int er Digit Time (1~14s) field.
The default delay time is 4s.
4. Click Conf irm to accept the change.
Not e
Live dialpad is configurable via web user interface only.
You can dial a hotline number immediately upon lifting the handset, pressing the
Speakerphone key or pressing a line key. You can also configure a delay, where the
phone will dial out the hotline number automatically after the specified period of time.
To configure hotline number via phone user interface:
1. Press Me nu->Features->Hotline.
2. Enter the desired number in the Hot line Number field.
3. Enter the delay time (in seconds) in the Hot line Delay field.
The valid values range from 0 to 10.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
Hotline is configurable via web user interface at the path F e atures->General
Inf ormation.
64