Mackie Digital 8 Bus Owner's Manual page 153

FX Routing
The Plug-in Configuration Window
Card Slot Column
Plug-in
display toggle
Input Channel
Assignment Pull-
down Menu Button
Card A
Card B
Card C
Card D (no
card installed)
Inserting a Plug-in into a Channel
A pre- or post-DSP channel insert can also be
used as the input source for a plug-in. When a
channel insert point is selected, the plug-in output
returns to the channel. The FX return path is
disconnected, although the plug-in output is still
displayed on the FX return channel meter.
A plug-in channel insert assignment can be
made from the Plugin Configuration window, or
from a pull-down menu from the mixer screen.
Plug-in Configuration Window
This assignment can also be made from the
control surface and VFD by holding the desired
channel's SELECT button for two seconds, then
paging over to Plug Pre or Plug Post, selecting
the input source, then selecting the desired plug-
in slot from the follow-on menu.
Input Source
Plug-in
Assignment Column
Assignment Column
Pre-DSP Pull-down
Close Window
Stereo/Mono
Mode Column
Stereo/Mono
Toggle Button
Post-DSP Pull-down
D8B Manual • Appendices • page 147