Common Radio Features
• Press the numeric keys to enter the second digit of the
location number.
The member's name and ID number are alternately
displayed.
Note: The display shows INVALID if you enter a nonexisting
number (for example, 24). The radio will revert back to
step 4.
5
Refer to "Sending a Call Alert Page" on page 38 for sending a
page.
Sending a Call Alert Page
Follow these steps to send a call alert page:
1
Press the PTT button.
If you hear four tones, the system has received the ID number.
The radio you called is on the air and has received your page.
Your radio automatically returns to the home display.
If you hear only one tone, the system has received the ID
number, but the radio you are paging is not on the air. Proceed
to the next step.
2
To try paging the number again, press the PTT button.
OR
To hang up, press the EXIT softkey to hang up. The radio
returns to the home display.
Note: If you hear a low-pitched alert tone
and the display shows NO ACK, the
radio you called did not
acknowledged the Call Alert within
six seconds. Try again or press the EXIT softkey
to exit.
38