Motorola XTL 1500 User Manual page 6

Going Directly to an ID Number in the Call List
1 Press the CALL (PAGE for Call Alert) softkey.
2 The display shows the last ID transmitted or received.
In the case of private call, the display shows the ID
number (Private Conversation II).
3 Use the navigation keys to enter the call list.
OR
Rotate Mode knob to scroll to the desired list entry
4 Press the 0 to 9 keys to enter the location number.
The display alternately shows the name and ID
number associated with the entry. If there are 10 or
more list entries, the display shows LOC #X|.
Use the numeric keypad again to enter the second
digit of the location number.
5 Proceed to step 1 of "Send a Private Conversation
Call" or "Send a Call Alert Page."
Sending (Enhanced Private) Unit to unit Conversation
Call
1 Press the PTT button to transmit the displayed ID
number.
If the radio you are calling is not in service, the display
shows NO ACK. If the other party does not answer
within 20 seconds, the display shows NO ANSR.
2 Press EXIT to exit private call, or press the PTT
button to speak.
3 Press EXIT to hang up.
The radio returns to the home display.
Sending a Call Alert Page
1 Press the PTT button to transmit the displayed ID
number.
If the radio you are paging cannot be reached, you
hear only one beep.
2 Press the PTT button to try again, or press EXIT to
hang up.
If the radio you called has received your page, you
will hear four beeps. The display shows ACK RCVD.
The radio returns to the home display .
Answering a Private (and Enhanced Private)
Conversation Call
When a private call is received, the display alternately
shows CALL RCV and the current mode name. Then the
F annunciator will flash. You hear four alert tones.
1 Press the CALL softkey, or press the preprogrammed
call response button.
2 The display shows the last ID number transmitted or
received. In the case of private call, the display
shows the ID number (Private Conversation II).
3 Press the PTT button to answer the call.
If you hear a busy tone, the system is busy.
4 Press m below RESP, or the preprogrammed call
response button to hang up.
The radio saves the caller's ID number and returns to
the home display.
Answering a Call Alert Page
When a call alert page is received, the display alternately
shows PAGE RCV and the current mode name. The the F
annunciator flash. You hear a four-beep tone.
1 Press the PTT button to answer the page.
The display shows the current mode. The alert tone,
and F turn off. The ID is saved as the last ID number
received.
2 Press the PTT button to talk, release to listen.
Everyone who belongs to the talkgroup will hear your
transmission.
OR
If you want to respond to the page with a Private Call:
a. Press m below CALL.
b. The display shows the ID of the paging radio.
3 Proceed to step 1 of "Send a Private Conversation
Call."
Automatic Multiple Site Selection (AMSS)
Viewing the Current Site and Forcing a Site Change
1 Press the SITE/SEARCH button momentarily.
The display shows the number of the site if the radio
is locked (or SCANNING if the radio is scanning).
2 Press and hold down the search button while the
radio scans for a new site.
The radio returns to the home display.
Locking and Unlocking a Site
1 Press LOCK, or press the preprogrammed lock button.
2 Press m below SITE. The display shows the
current lock state, and the LOCK, UNLK and EXIT
softkeys.
3 Press m button LOCK or UNLK. The radio saves the
new setting and returns to the home display.